Bio-Logic BIO-1.5 Spezifikationen

375 Marcus Boulevard • Hauppauge, NY 11788 • USA631.273.0500 • Fax: 631.273.0771e-mail: [email protected] Product Information Available at

10TUBING REMOVAL• If the system has been in use, shut off supply valve and drain the system before removing any tubing.• Push in collar, squarely agai

11MAINTENANCE• The Pure Water PackTMis designed to operate with a minimal amount of maintenance, providing the water quality does not exceed maximum c

12LAMP INSTALLATION OR REPLACEMENT: BIO-LOGIC®BIO-1.5 PURE WATER PACKTM120V 50/60HZ USING BALLAST NO. 10-0010B1. Disconnect power to Pure Water PackTM

13LAMP INSTALLATION OR REPLACEMENT: BIO-LOGIC®BIO-1.5 PURE WATER PACKTM230V 50/60HZ USING BALLAST NO.10-0504AFigure 8 - Lamp Replacement for Bio-Logic

14QUARTZ SLEEVE CLEANING OR REPLACEMENTStep 4 - Remove Gland NutsStep 6 - Remove Quartz SleeveStep 5 - Remove Washer & O-Ring1. Disconnect power t

15REPLACEMENT OF BROKEN QUARTZ SLEEVEFigure 11 - Chamber Head RemovalCAUTION: Broken Quartz is SHARP. It is recommended that protective goggles and gl

16Problem Possible Cause Corrective ActionPurifier not operating. No electrical power… Verify that the purifier is connected to alive power source.Cr

17TECHNICAL SPECIFICATIONSTable 3Technical Specifications220v 50/60Hz and 12vDC units are also available.Consult Factory for specificvoltage require

REPLACEMENT PARTSTable 4 - Replacement Parts Bio-Logic®1.5* Lamp Socket and Ballast not shownITEM MODELNO. DESCRIPTION QUANTITY BIO-1.51 Rubber O-ring

19ITEMNO DESCRIPTION QUANTITY Pure Water PackTM1 Filter Bracket 1 25-9132A2A Bio-Logic®1.5 120v 50/60Hz 1 25-9125A12B Bio-Logic®1.5 230v 50/60Hz 1 25-

2TABLE OF CONTENTSSAFETY WARNINGS...

20WARRANTYWe warrant that this product will be free from defects in material and workmanship for a period of one yearfrom the date of shipment thereof

3SAFETY WARNINGS• All personnel should be alerted to the potential hazards indicated by the product safety labeling on this unit.• The following conve

4PRODUCT APPLICATIONCONSTRUCTION• All filtration and disinfection components, of the Bio-Logic®Pure Water PackTM, are conveniently mounted on a single

5Figure 1 - Bio-Logic®Pure Water PackTM- Drinking Water SystemPure Water PackTMINSTALLATIONLOCATION1. The Pure Water PackTMis designed for “under the

66SADDLE VALVE INSTALLATIONCheck with the local public works department for plumbing codes. Follow all local plumbing codes when installingcomponents

7FAUCET INSTALLATION CONT.1. Select faucet location.• Make sure the faucet is far enough away so not to interfere with the regular faucet or any other

8WARNING: To insure proper operation and safety of your water purifier, your unit must be groundedto a known good ground.!GROUNDING KIT INSTALLATION:

9Figure 4 - Completed GroundGROUNDING KIT INSTALLATION: BIO-LOGIC®BIO-1.5 PWP230V 50/60HZ USING BALLAST NO.10-0504A (CONTINUED)2. Wrap the copper stra